NewCS 1.31This is NewCS 1.31 - the New CardServer by Butter-team..
Compiled on Sep 28 2007 at 16:55:49
Reading Config file /etc/newcs.xml
TCP-log password is enabled, set to: aonorchid
TCP-log set to simple mode
level: normal
type: init
output: console,tcp
logger config: level 1 type 3 output 5
Console log options: level 1 type 3
TCP log options: level 1 type 3
[ 09:55:28 ] [ Box detect ] Box type 1
[ 09:55:28 ] [ Config ] Value in <ipk> for device 0 (Phoenix Interface) is INVALID, skipping...
[ 09:55:28 ] [ Config ] Value in <ucpk> for device 0 (Phoenix Interface) is INVALID, skipping...
[ 09:55:28 ] [ Config ] Pincode for device 0 (Phoenix Interface): 0000
[ 09:55:28 ] [ Config ] /dev/ttyS0 ECM priority: round
[ 09:55:28 ] [ EMM Cache ] Initialising Cache with 5 entries
[ 09:55:28 ] [ ECM Cache ] Initialising dynamic Cache
[ NewCS ] Process ID is: 4367
[ 09:55:28 ] [ Loader ] Starting Telnet on port xxxx
[ 09:55:28 ] bind: error! 13: Permission denied
Can't create server: Address already in use
[ 09:55:28 ] [ Loader ] Reader type 2 on node /dev/ttyS0
[ 09:55:28 ] [ Phoenix ] Opening device /dev/ttyS0
[ 09:55:28 ] [ Phoenix ] Setting Parity to: NONE
[ 09:55:28 ] [ Phoenix ] Setting 2 Stop bits on node /dev/ttyS0
[ 09:55:28 ] [ Phoenix ] Setting Baud to custom 16129
[ 09:55:29 ] [ Phoenix ] Normal RESET on node /dev/ttyS0
[ 09:55:30 ] [ Loader ] Clearing all autosids on reader ...
[ 09:55:30 ] [ Loader ] Unknown card
[ 09:55:30 ] [ Loader ] Trying Irdeto (T=14)
[ 09:55:30 ] [ Loader ] Reader type 2 on node /dev/ttyS0
[ 09:55:30 ] [ Phoenix ] Opening device /dev/ttyS0
[ 09:55:30 ] [ Phoenix ] Setting Parity to: NONE
[ 09:55:30 ] [ Phoenix ] Setting 2 Stop bits on node /dev/ttyS0
[ 09:55:30 ] [ Phoenix ] Setting Baud to standard 9600
[ 09:55:30 ] [ Phoenix ] Normal RESET on node /dev/ttyS0
[ 09:55:32 ] [ Loader ] Clearing all autosids on reader ...
[ 09:55:32 ] [ ATR ] T=14 1etu=104.17us Guardtime:17etu WWT:9600etu
[ 09:55:32 ] [ ATR ] Historical bytes: I R D E T O A C S V 5 . 0
[ 09:55:32 ] [ Loader ] Init Irdeto card
[ 09:55:32 ] [ Phoenix ] Setting Parity to: NONE
[ 09:55:32 ] [ Phoenix ] Setting 2 Stop bits on node /dev/ttyS0
[ 09:55:32 ] [ Phoenix ] Setting Baud to standard 9600
[ 09:55:32 ] [ Keyman ] Adding key xxxxx type 0 on Provider 000000 for caid 0604 ID=0
[ 09:55:33 ] [ Keyman ] Adding key xxxxx type 1 on Provider 000000 for caid 0604 ID=0
[ 09:55:33 ] [ Keyman ] Adding key FFFFFF type 1 on Provider 000001 for caid 0604 ID=1
[ 09:55:33 ] [ Keyman ] Adding key FFFFFF type 1 on Provider 000002 for caid 0604 ID=2
[ 09:55:33 ] [ Keyman ] Adding key FFFFFF type 1 on Provider 000003 for caid 0604 ID=3
[ 09:55:33 ] [ Loader ] Card 0604 on port /dev/ttyS0 ready
[ 09:55:33 ] [ Loader ] Starting Newcamd Server on port 26001
[ 09:55:33 ] bind: error! 98: Address already in use
[ 09:55:33 ] [ Loader ] Starting Radegast Server on port 26000
[ 09:55:33 ] bind: error! 98: Address already in use
[ 09:55:33 ] [ NewCS ] Ready to GO!