บอร์ดโบราณ ดาวเทียม - HD player - CCTV

NewCS 1.31

This is NewCS 1.31 - the New CardServer by Butter-team..
Compiled on Sep 28 2007 at 16:55:49
Reading Config file  /etc/newcs.xml
TCP-log password is enabled, set to: aonorchid
TCP-log set to simple mode
level: normal
type: init
output: console,tcp
logger config: level 1 type 3 output 5
Console log options: level 1 type 3
TCP log options: level 1 type 3
[ 09:55:28 ] [ Box detect ] Box type 1
[ 09:55:28 ] [ Config ] Value in <ipk> for device 0 (Phoenix Interface) is INVALID, skipping...
[ 09:55:28 ] [ Config ] Value in <ucpk> for device 0 (Phoenix Interface) is INVALID, skipping...
[ 09:55:28 ] [ Config ] Pincode for device 0 (Phoenix Interface): 0000
[ 09:55:28 ] [ Config ] /dev/ttyS0 ECM priority: round
[ 09:55:28 ] [ EMM Cache ] Initialising Cache with 5 entries
[ 09:55:28 ] [ ECM Cache ] Initialising dynamic Cache
[ NewCS ] Process ID is: 4367
[ 09:55:28 ] [ Loader ] Starting Telnet on port xxxx
[ 09:55:28 ] bind: error! 13: Permission denied
Can't create server: Address already in use
[ 09:55:28 ] [ Loader ] Reader type 2 on node /dev/ttyS0
[ 09:55:28 ] [ Phoenix ] Opening device /dev/ttyS0
[ 09:55:28 ] [ Phoenix ] Setting Parity to: NONE
[ 09:55:28 ] [ Phoenix ] Setting 2 Stop bits on node /dev/ttyS0
[ 09:55:28 ] [ Phoenix ] Setting Baud to custom 16129
[ 09:55:29 ] [ Phoenix ] Normal RESET on node /dev/ttyS0
[ 09:55:30 ] [ Loader ] Clearing all autosids on reader ...
[ 09:55:30 ] [ Loader ] Unknown card
[ 09:55:30 ] [ Loader ] Trying Irdeto (T=14)
[ 09:55:30 ] [ Loader ] Reader type 2 on node /dev/ttyS0
[ 09:55:30 ] [ Phoenix ] Opening device /dev/ttyS0
[ 09:55:30 ] [ Phoenix ] Setting Parity to: NONE
[ 09:55:30 ] [ Phoenix ] Setting 2 Stop bits on node /dev/ttyS0
[ 09:55:30 ] [ Phoenix ] Setting Baud to standard 9600
[ 09:55:30 ] [ Phoenix ] Normal RESET on node /dev/ttyS0
[ 09:55:32 ] [ Loader ] Clearing all autosids on reader ...
[ 09:55:32 ] [ ATR ] T=14  1etu=104.17us  Guardtime:17etu  WWT:9600etu
[ 09:55:32 ] [ ATR ] Historical bytes: I R D E T O   A C S   V 5 . 0
[ 09:55:32 ] [ Loader ] Init Irdeto card
[ 09:55:32 ] [ Phoenix ] Setting Parity to: NONE
[ 09:55:32 ] [ Phoenix ] Setting 2 Stop bits on node /dev/ttyS0
[ 09:55:32 ] [ Phoenix ] Setting Baud to standard 9600
[ 09:55:32 ] [ Keyman ] Adding key xxxxx type 0 on Provider 000000 for caid 0604 ID=0
[ 09:55:33 ] [ Keyman ] Adding key xxxxx type 1 on Provider 000000 for caid 0604 ID=0
[ 09:55:33 ] [ Keyman ] Adding key FFFFFF type 1 on Provider 000001 for caid 0604 ID=1
[ 09:55:33 ] [ Keyman ] Adding key FFFFFF type 1 on Provider 000002 for caid 0604 ID=2
[ 09:55:33 ] [ Keyman ] Adding key FFFFFF type 1 on Provider 000003 for caid 0604 ID=3
[ 09:55:33 ] [ Loader ] Card 0604 on port /dev/ttyS0 ready
[ 09:55:33 ] [ Loader ] Starting Newcamd Server on port 26001
[ 09:55:33 ] bind: error! 98: Address already in use
[ 09:55:33 ] [ Loader ] Starting Radegast Server on port 26000
[ 09:55:33 ] bind: error! 98: Address already in use
[ 09:55:33 ] [ NewCS ] Ready to GO! :)

ผิดๆครับ อันนี้เป็น file newcs.xml ครับ

<?xml version="1.0"?>
<!--

For setup-issues, look in readme.txt!
If there are other troubles, try different forums or irc channels around :o)

The configfile are NOT case-sensitive, and shouldnt care about dos/unix cr/lf.

** This is the example file for Phoenix Interface.

-->

<newCSconfig>
   <readers name="Phoenix">
      <device>
         <name>Phoenix Interface</name>
         <type>phoenix</type>
         <mhz>600</mhz>
         <node>/dev/ttyS0</node>
         <parity>none</parity>
         <reset>normal</reset>
         <export>Yes</export>
         <enabled>Yes</enabled>
         <blocksa>No</blocksa>
         <blockua>No</blockua>
         <blockga>No</blockga>
         <!-- <boxkey>0000000000</boxkey>  -->
         <!-- <rsa>0000000000</rsa> -->
         <irdeto-camkey>0000000000000000</irdeto-camkey>
         <irdeto-camkey-data>0000000000000000000000000
0000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000
000000000000000000000000000000000000000000000000000000000000</irdeto-camkey-data>
         <crypto-special>No</crypto-special>
         <ipk>000000000000000000000000000000000000000000000000000
00000000000000000000000000000000000000000000000000000000000000000
00000000000000000000000000000000000000000000000000000000000000000
000000000000000000000000000000000000000000000000000000000000000000000000000</ipk>
         <ucpk>000000000000000000000000000000000000000000000000000
000000000000000000000000000000000000000000000000000000000000000000
000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000</ucpk>
         <PTShandshake>No</PTShandshake>
         <carddetect>yes</carddetect>
         <newcamd_port>26001</newcamd_port>
         <autosid>Yes</autosid>
         <Seca-PPV>no</Seca-PPV>
         <pincode>0000</pincode>
         <priority>round</priority>
      </device>
   </readers>
   <radegastserver>
         <enabled>yes</enabled>
         <port>26000</port>
         <allow>
            <hostname>192.168.1.101</hostname>
         </allow>
   </radegastserver>
   <cache>
         <emm>5</emm>
         <ecm>-1</ecm>
   </cache>   
   <debug>
         <password>aonorchid</password>   
         <level>normal</level>
         <type>init</type>
         <output>console,tcp</output>
         <console_options>normal,init</console_options>
         <tcp_port>1001</tcp_port>
         <tcp_options>normal,init</tcp_options>
   </debug>
       <httpd>
         <server>
         <port>8080</port>
         <enabled>yes</enabled>
         </server>
         <user>
         <name>aon</name>
         <password>orchid</password>
         <accesslevel>admin</accesslevel>
         </user>
       </httpd>
   <newcamdserver>
         <enabled>Yes</enabled>
         <name>newcs</name>
         <deskey>01 02 03 04 05 06 07 08 09 10 11 12 13 14</deskey>
         <user>
            <name>dummy</name>
            <password>dummy</password>
            <hostname>192.168.1.101</hostname>
            <port>12000</port>
            <au>on</au>
            <sidoverride>off</sidoverride>
            <spider>No</spider>
        <rate>2</rate>
          </user>
   </newcamdserver>
</newCSconfig>

File Cccam.cfg ครับ


##############################################
#################################################
#  CCcam Server  NewCS
#############################################
##################################################
N: 192.168.1.101 26001 dummy dummy 01 02 03 04 05 06 07 08 09 10 11 12 13 14
#############################################
##################################################
SERVER LISTEN PORT : 26003
ALLOW TELNETINFO : yes
ALLOW WEBINFO : yes
WEBINFO USERNAME : test
WEBINFO PASSWORD : 1111
WEBINFO LISTEN PORT : 8089
TELNETINFO USERNAME : test
TELNETINFO PASSWORD : 1111
TELNETINFO LISTEN PORT : 26004
ZAP OSD TIME : 3
OSD USERNAME : root
OSD PASSWORD : dreambox
OSD PORT : 80
SHOW TIMING : yes
MINI OSD : yes
DEBUG : yes
DISABLE EMM : no
EXTRA EMM LEVEL : no
EMM THREADS : 1
PROVIDERINFO FILE : /var/etc/CCcam.providers
CHANNELINFO FILE : /var/etc/CCcam.channelinfo
CAID PRIO FILE : /var/etc/CCcam.prio
LOG WARNINGS : /tmp/warnings.txt
########################################
#########################################
#STATIC CW FILE : /var/keys/constant.cw
#SOFTKEY FILE : /var/keys/SoftCam.Key
#AUTOROLL FILE : /var/keys/Autoroll.Key
########################################
#########################################
F: user01 001 1 0 1 {0:0:1}
F: user02 002 1 0 1 {0:0:1}
F: user03 003 1 0 1 {0:0:1}
F: user04 004 1 0 1 {0:0:1}
F: user05 005 1 0 1 {0:0:1}
F: user06 006 1 0 1 {0:0:1}
F: user07 007 1 0 1 {0:0:1}
F: user08 008 1 0 1 {0:0:1}
F: user09 009 1 0 1 {0:0:1}
F: user10 010 1 0 1 {0:0:1}
#######################################
##########################################

port 12000 ไปรับ 26001 แก้ให้ตรงกัน

ท่านมาถึงก็ไม่ได้ลองหาข้อมูลก่อนเลยนะท่าน มาถึงก็ตั้งกระทู้ถามก่อนเลยนะ
ลองดู http://www.boransat.net/board/index.php?topic=10667.0
ผมว่ามีคำตอบให้ท่านแน่นอนครับ

น่าจะได้แล้วนิ  หรือ แก้
N:127.0.0.1 26001 dummy dummy 01 02 03 04 05 06 07 08 09 10 11 12 13 14
ส่วนลูก
c:ipsever 26003 user01 001

ได้แล้วครับ ขอบคุณครับคุณ kontiddin ,vorawat,Basic_Step

ปล.ขออภัยครับที่ไม่ได้หาข้อมูลก่อนถาม แบบว่ามึนครับช่วงนั้น

ไม่เป็นไร สมัยก่อนผมก็เป็น ไม่ว่ากันครับ 5555

ปิดคดี ไปแล้วเหรอครับ

สำเร็จแล้ว ดีใจด้วยครับ